Deploy Streamlit using Docker

So you have an amazing app and you want to start sharing it with other people, what do you do? You have a few options. First, where do you want to run your Streamlit app, and how do you want to access it?

  • On your corporate network - Most corporate networks are closed to the outside world. You typically use a VPN to log onto your corporate network and access resources there. You could run your Streamlit app on a server in your corporate network for security reasons, to ensure that only folks internal to your company can access it.
  • On the cloud - If you'd like to access your Streamlit app from outside of a corporate network, or share your app with folks outside of your home network or laptop, you might choose this option. In this case, it'll depend on your hosting provider. We have community-submitted guides from Heroku, AWS, and other providers.

Wherever you decide to deploy your app, you will first need to containerize it. This guide walks you through using Docker to deploy your app. If you prefer Kubernetes see Deploy Streamlit using Kubernetes.

  1. Install Docker Engine
  2. Check network port accessibility

If you haven't already done so, install Docker on your server. Docker provides .deb and .rpm packages from many Linux distributions, including:

Verify that Docker Engine is installed correctly by running the hello-world Docker image:

sudo docker run hello-world


Follow Docker's official post-installation steps for Linux to run Docker as a non-root user, so that you don't have to preface the docker command with sudo.

As you and your users are behind your corporate VPN, you need to make sure all of you can access a certain network port. Let's say port 8501, as it is the default port used by Streamlit. Contact your IT team and request access to port 8501 for you and your users.

Docker builds images by reading the instructions from a Dockerfile. A Dockerfile is a text document that contains all the commands a user could call on the command line to assemble an image. Learn more in the Dockerfile reference. The docker build command builds an image from a Dockerfile. The docker run command first creates a container over the specified image, and then starts it using the specified command.

Here's an example Dockerfile that you can add to the root of your directory. i.e. in /app/

# app/Dockerfile FROM python:3.9-slim WORKDIR /app RUN apt-get update && apt-get install -y \ build-essential \ curl \ software-properties-common \ git \ && rm -rf /var/lib/apt/lists/* RUN git clone . RUN pip3 install -r requirements.txt EXPOSE 8501 HEALTHCHECK CMD curl --fail http://localhost:8501/_stcore/health ENTRYPOINT ["streamlit", "run", "", "--server.port=8501", "--server.address="]

Let’s walk through each line of the Dockerfile :

  1. A Dockerfile must start with a FROM instruction. It sets the Base Image (think OS) for the container:

    FROM python:3.9-slim

    Docker has a number of official Docker base images based on various Linux distributions. They also have base images that come with language-specific modules such as Python. The python images come in many flavors, each designed for a specific use case. Here, we use the python:3.9-slim image which is a lightweight image that comes with the latest version of Python 3.9.



    You can also use your own base image, provided the image you use contains a supported version of Python for Streamlit. There is no one-size-fits-all approach to using any specific base image, nor is there an official Streamlit-specific base image.

  2. The WORKDIR instruction sets the working directory for any RUNCMDENTRYPOINTCOPY and ADD instructions that follow it in the Dockerfile . Let’s set it to app/ :

    WORKDIR /app


    As mentioned in Development flow, for Streamlit version 1.10.0 and higher, Streamlit apps cannot be run from the root directory of Linux distributions. Your main script should live in a directory other than the root directory. If you try to run a Streamlit app from the root directory, Streamlit will throw a FileNotFoundError: [Errno 2] No such file or directory error. For more information, see GitHub issue #5239.

    If you are using Streamlit version 1.10.0 or higher, you must set the WORKDIR to a directory other than the root directory. For example, you can set the WORKDIR to /app as shown in the example Dockerfile above.

  3. Install git so that we can clone the app code from a remote repo:

    RUN apt-get update && apt-get install -y \ build-essential \ curl \ software-properties-common \ git \ && rm -rf /var/lib/apt/lists/*
  4. Clone your code that lives in a remote repo to WORKDIR:

    a. If your code is in a public repo:

    RUN git clone .

    Once cloned, the directory of WORKDIR will look like the following:

    app/ - requirements.txt -

    where requirements.txt file contains all your Python dependencies. E.g

    altair pandas streamlit

    and is your main script. E.g.

    from collections import namedtuple import altair as alt import math import pandas as pd import streamlit as st """ # Welcome to Streamlit! Edit `/` to customize this app to your heart's desire :heart: If you have any questions, checkout our [documentation]( and [community forums]( In the meantime, below is an example of what you can do with just a few lines of code: """ with st.echo(code_location='below'): total_points = st.slider("Number of points in spiral", 1, 5000, 2000) num_turns = st.slider("Number of turns in spiral", 1, 100, 9) Point = namedtuple('Point', 'x y') data = [] points_per_turn = total_points / num_turns for curr_point_num in range(total_points): curr_turn, i = divmod(curr_point_num, points_per_turn) angle = (curr_turn + 1) * 2 * math.pi * i / points_per_turn radius = curr_point_num / total_points x = radius * math.cos(angle) y = radius * math.sin(angle) data.append(Point(x, y)) st.altair_chart(alt.Chart(pd.DataFrame(data), height=500, width=500) .mark_circle(color='#0068c9', opacity=0.5) .encode(x='x:Q', y='y:Q'))

    b. If your code is in a private repo, please read Using SSH to access private data in builds and modify the Dockerfile accordingly -- to install an SSH client, download the public key for, and clone your private repo. If you use an alternative VCS such as GitLab or Bitbucket, please consult the documentation for that VCS on how to copy your code to the WORKDIR of the Dockerfile.

    c. If your code lives in the same directory as the Dockerfile, copy all your app files from your server into the container, including, requirements.txt, etc, by replacing the git clone line with:

    COPY . .

    More generally, the idea is copy your app code from wherever it may live on your server into the container. If the code is not in the same directory as the Dockerfile, modify the above command to include the path to the code.

  5. Install your app’s Python dependencies from the cloned requirements.txt in the container:

    RUN pip3 install -r requirements.txt
  6. The EXPOSE instruction informs Docker that the container listens on the specified network ports at runtime. Your container needs to listen to Streamlit’s (default) port 8501:

    EXPOSE 8501
  7. The HEALTHCHECK instruction tells Docker how to test a container to check that it is still working. Your container needs to listen to Streamlit’s (default) port 8501:

    HEALTHCHECK CMD curl --fail http://localhost:8501/_stcore/health
  8. An ENTRYPOINT allows you to configure a container that will run as an executable. Here, it also contains the entire streamlit run command for your app, so you don’t have to call it from the command line:

    ENTRYPOINT ["streamlit", "run", "", "--server.port=8501", "--server.address="]

The docker build command builds an image from a Dockerfile . Run the following command from the app/ directory on your server to build the image:

docker build -t streamlit .

The -t flag is used to tag the image. Here, we have tagged the image streamlit. If you run:

docker images

You should see a streamlit image under the REPOSITORY column. For example:

REPOSITORY TAG IMAGE ID CREATED SIZE streamlit latest 70b0759a094d About a minute ago 1.02GB

Now that you have built the image, you can run the container by executing:

docker run -p 8501:8501 streamlit

The -p flag publishes the container’s port 8501 to your server’s 8501 port.

If all went well, you should see an output similar to the following:

docker run -p 8501:8501 streamlit You can now view your Streamlit app in your browser. URL:

To view your app, users can browse to or http://localhost:8501



Based on your server's network configuration, you could map to port 80/443 so that users can view your app using the server IP or hostname. For example: http://your-server-ip:80 or http://your-hostname:443.


Still have questions?

Our forums are full of helpful information and Streamlit experts.